{"id":11417,"date":"2026-08-10T10:31:52","date_gmt":"2026-08-10T10:31:52","guid":{"rendered":"https:\/\/nokobox.com\/index.php\/item\/udemy-fundamentals-of-electrical-controls-2020-6\/"},"modified":"2026-08-10T10:31:52","modified_gmt":"2026-08-10T10:31:52","slug":"udemy-fundamentals-of-electrical-controls-2020-6","status":"publish","type":"digital_item","link":"https:\/\/nokobox.com\/index.php\/item\/udemy-fundamentals-of-electrical-controls-2020-6\/","title":{"rendered":"Udemy \u2013 Fundamentals of Electrical Controls 2020-6"},"content":{"rendered":"
\n

Descriptions<\/h2>\n

Fundamentals of Electrical Controls, In this course, we focus on industrial and commercial installations, we will start with the absolute basics of electrical circuits. We look at the fundamentals of resistive circuits, and introduce Ohms Law, a mathematical formula that all electricians learn. The course looks at the different types of voltages and where they come from in the real world, focussing on transformer formations from the power supply authority, and AC and DC Voltages. As this is a course on the fundamentals of electrical controls, we will go through the basics of control circuits such as, normally open and normally closed, and look at how controls are made up of series and parallel circuits. Taking a more practical approach to the subject, we dive inside control panels and look at each electrical component that we will be using later in the course, in our own motor control installation. We look inside the parts in detail and see how they work, discuss ratings, and learn how to size them up, with a particular focus on contactors and overloads. We also simplify an explanation of how an asynchronous motor works. Before we get to wiring up our own control circuit, we look at the different types of control voltages in the real world and follow them  from end device at the customers installation all the way back to the supply transformer at the power company, so we can see how a full installation might look, and get an insight into different systems that we might find in industry.<\/p>\n

After learning the basics, we look at how we would install a motor control installation from scratch, including the motor itself. We get to see all the parts that we have learned about, working together in a mock real world installation, we learn how to size up the components and then go through the wiring of the circuit step by step. Part of installing a control board is commissioning it, so we go through the operation of the circuit after we have installed it to make sure it works.  Installations are often amended and modified in the real world, so we\u2019ll look at a few ways in which we could modify our mock installation, change our wiring around and re-commission the installation.  At the end of the course, we\u2019re going to challenge ourselves, and learn how to fault find a circuit as we would if we were called to a breakdown as an electrical controls technician. We\u2019ll go through a few faults that we might come up against in the industry and look at how we might repair them. We also briefly touch on preventative maintenance techniques and discuss why they are important, for safety reasons and also financial reasons too.<\/p>\n

What you\u2019ll learn<\/h3>\n